Navimow (Segway)
Navimow i215 LiDAR
Some merchant links are affiliate links, marked “Affiliate link”: if you buy through one, we may earn a commission. Rankings come from our published rules, not commissions. Read our disclosure.
Check it against your yardAt a glance
- Obstacle climb height
- Not found in manufacturer sources we checked
- Obstacle climb height source retrieved
Where it fits
See this model in the gate-width reference.
Lawn area
Excluded for lawns larger than 16,117 sq ft.
Manufacturer spec and sources
Slope
Excluded for slopes above 45%.
Manufacturer spec and sources
Manufacturer price
Excluded when the budget limit is below the verified manufacturer suggested retail price shown here.
Manufacturer spec and sources
Boundary wire
No exclusion under this rule when wire-free setup is requested.
Manufacturer spec and sources
RTK antenna
No exclusion under this rule when avoiding a required antenna.
Manufacturer spec and sources
Multiple zones
Not confirmed by manufacturer: Multiple mowing zones.
Manufacturer spec and sources
Minimum passage width
Not confirmed by manufacturer: Minimum passage width (inches).
Manufacturer spec and sources
Unclear from manufacturerMinimum passage width (inches) source retrievedManufacturer wording
“The minimum height for the Navimow i2 LiDAR to pass through a passage, fence, or small gate should be at least 40cm (15.75"), and the minimum width should be 100cm (39.31").”
Narrow passages (body width)
Not confirmed by manufacturer: Mower body width (inches).
Our rule and sources
Rationale: A passage narrower than the mower body physically cannot fit it. Body clearance alone does not establish navigation clearance.
Not found in manufacturer sources we checkedObstacle climb height
Not confirmed by manufacturer: Obstacle climb height (inches).
Manufacturer spec and sources
Heavy tree cover
No exclusion under the heavy-tree-cover editorial rule; this is not a manufacturer canopy guarantee.
Our rule and sources
Rationale: Satellite RTK needs open sky. Explicit lidar, vision positioning or boundary-wire navigation provides an alternative; this is an editorial fit rule, not a manufacturer canopy guarantee.
Similar models
All specifications
- Lawn area (sq ft)
- Maximum slope (%)
- Navigation
- Vision positioning
- Boundary wire requirement
- RTK antenna requirement
- Multiple mowing zones
- Manufacturer suggested retail price (USD)
- Minimum passage width (inches)
- Unclear from manufacturerMinimum passage width (inches) source retrieved
Manufacturer wording
“The minimum height for the Navimow i2 LiDAR to pass through a passage, fence, or small gate should be at least 40cm (15.75"), and the minimum width should be 100cm (39.31").”
- Mower body width (inches)
- Not found in manufacturer sources we checked
- Cutting width (inches)
- Unclear from manufacturerCutting width (inches) source retrieved
Manufacturer wording
“"value": "20 - 60 mm", "displayName": "Cutting Width"”
- Cutting height range (inches)
- Wheel drive
- Obstacle detection
- Obstacle climb height (inches)
- Positioning under tree cover
- Positioning under tree cover source retrieved
Manufacturer wording
“LiDAR + Vision dual system for flawless navigation, even under trees or at night.”
- Keep-out zones
- Dust and water resistance rating
- Noise level (dB)
- Connectivity
- Warranty
- Warranty source retrieved
Manufacturer wording
“Includes Free Network RTK & 1-Year Connect+ Service. 3-Year Warranty.”